KIT, MANIFOLD PROBLUE
Manifold Oring Kit for Nordson® Models ProBlue® 4/7/10 melters. This kit contains viton orings and oring lube only.
Read MoreManifold Oring Kit for Nordson® Models ProBlue® 4/7/10 melters. This kit contains viton orings and oring lube only.
Read MoreNordson® Compatible Pneumatic Tray Kit The pneumatic tray controls incoming air pressure to your hot melt pump. This is a critical part you will want to stock. Once this part hits it's end of life, the melter will not run, causing costly downtime.
Read MoreMain on/off power switch for Nordson® ProBlue® 4, ProBlue® 7 & ProBlue® 10 hot melt adhesive systems. Direct replacement includes dust cover.
Read MoreNordson® ProBlue® Equivalent Pump Rebuild Kit This is a rebuild kit for Nordson® ProBlue® pumps.
Read MoreNordson® ProBlue® Pump Compatible Crossover Tube Crossover tube to fit Nordson® ProBlue®. Crossover tube carries the glue from the pump to the manifold for glue to be distributed to the heated glue hoses.
Read MoreLevel sensor for the tank in a Nordson® ProBlue 4 & Nordson® ProBlue® 7. This sensor alerts the operator when the hot melt adhesive level has reached a low level that could affect production.
Read MoreLevel sensor for the tank in a Nordson® ProBlue® 15 & Nordson® ProBlue® 30. This sensor alerts the operator when the hot melt adhesive level has reached a low level that could affect production.
Read MoreExtended 24 inch electrical cordset with RTD sensor for Nordson® applicator gun used on Model 2300/3000/ProBlue® and DuraBlue heated hoses.
Read MoreLevel sensor for the tank in a Nordson® ProBlue 10. This sensor alerts the operator when the hot melt adhesive level has reached a low level that could affect production.
Read More