You Searched for ""
10ft 230V RTD Washdown Hose Equivalent to Nordson® 276743
Keystone Industries® is your source for washdown hoses for automatic applicator heads that need to resist contact with moisture. We engineered this hose for multiple types of hot melt systems, so you can continue using your existing unit efficiently. The KNHAW1023 is an aftermarket equivalent to Nordson® 276743, Valco Melton®780XX020, and ITW Dynatec®104145.
Read More
6ft 230V Automatic RTD Washdown Heated Hose Equivalent to Nordson® 276741
Keystone Industries® offers high-performance adhesive products engineered after popular OEM parts, such as this popular length, lightweight 6ft washdown style hose. Use the KNHAW0623 heated hose for washdown automatic applicator heads. An RTD sensor controls the temperature for continuous adhesive and sealant dispensing, and a protective rubber sheathing enhances the hose's durability.
Read More
12ft 230V RTD Automatic Washdown Hose
Durable high flex heated hose with rubber sleeving and RTD controlled heater wire. Recommended for robotics and moving equipment in washdown and wet environments. Electrical connectors are round to reduce possibility of moisture entry.
Read More
8ft 230V RTD Washdown Hose
Durable heated hose with rubber sleeving and RTD controlled heater wire. Recommended for washdown and wet environments. Electrical connectors are round to reduce possibility of moisture entry.
Read More
4ft 230V RTD Automatic Washdown Hose
Durable heated hose with rubber sleeving and RTD controlled heater wire. Recommended for washdown and wet environments. Electrical connectors are round to reduce possibility of moisture entry.
Read More
Three module Washdown applicator head with heater controlled by RTD sensor and Washdown cordset with round connector. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue Washdown automatic hoses with matching round connector. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read More
Dual module Low Profile Washdown applicator head with heater controlled by RTD sensor and Washdown cordset with round connector. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue Washdown automatic hoses with matching round connector. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read More
Single module Washdown applicator head with heater controlled by RTD sensor and Washdown cordset with round connector. H200 Reduced Cavity Style module (KNH2CRCXX) is used on this applicator head for more precise applications. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue washdown automatic hoses with matching round connector.
Read More
Single module Washdown applicator head with heater controlled by RTD sensor and Washdown cordset with round connector. H200 Zero Cavity Style module (KNH2CZCXX-MA) is used on this applicator head for more precise applications. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue washdown automatic hoses with matching round connector.
Read More
Single module Washdown applicator head with heater controlled by RTD sensor and Washdown cordset with round connector. H200 Zero Cavity Style module (KNH2CZCXX-MA) is used on this applicator head for more precise applications. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue washdown automatic hoses with matching round connector.
Read More