Compatible for Nordson® H200 Applicators Increase your production efficiency and reduce downtime with our aftermarket version of a Nordson® H200 module. Because we provide an aftermarket alternative, you save money and receive your parts on time.
Read MoreValve assembly standard for Slautterback® standard M100 style electric applicator heads.
Read MoreModule rebuild kits for rebuilding 50 Nordson® H200 style modules which include standard, spray, right angle and ClassicBlue styles.
Read MoreCompatible Applicator for Nordson® Melters - H20T 240V RTD Head It's important to select a quality applicator head for your adhesive application that is compatible with your system. We offer the RTD H20 Style applicator that can use the standard nozzle tips or the nozzle bars. These are commonly used in corrugated applications.
Read MoreRC .016 Hot Melt Module Reduced cavity modules provide less stringing and better cutoff than a standard module. Seat nozzle is built in and holds less glue in the nozzle cavity than a standard nozzle. Mounts on standard and low profile Nordson® style.
Read MoreReduce cavity modules provides less stringing and better cutoff than a standard module. Seat nozzle is built in and holds less glue in the nozzle cavity than a standard nozzle. Mounts on standard and low profile Nordson® style heads and comes with mounting o-rings and screws. offers less adhesive dripping.
Read MoreEight module standard applicator head with heater controlled by a fixed thermostat. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire the four modules simultaneously. Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreSingle module standard applicator head with heater controlled by a RTD sensor. H20 Style standard modules (KNH2X) is used on this applicator head. Applicator head will fit to Nordson® Model 2300/3000 standard automatic hoses. Uses KNRN90 retaining nut for nozzles requiring retaining nut and KNH2X modules.
Read MoreSingle module standard washdown applicator head with heater controlled by a RTD sensor. H20 Style standard modules (KNH2X) is used on this applicator head. Applicator head will fit to Nordson® Model 2300/3000 standard washdown automatic hoses. Uses KNRN90 retaining nut for nozzles requiring retaining nut and KNH2X modules.
Read MoreSingle module standard applicator head with heater controlled by a fixed thermostat. H20 Style standard modules (KNH2X) is used on this applicator head. Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN90 retaining nut for nozzles requiring retaining nut and KNH2X modules.
Read More