Lack of flow with Nordson® MiniBlue™ Applicators

There are several possible causes to little or no glue flow from your glue module.

Possible Reason
Nozzle is clogged
Replace nozzle or clean nozzle.  Use KNCK10 cleaning kit.
Adhesive has entered air section of module
Replace module.  Part No. 100K001A01.
Module failed due to end of life
Replace module.  Part No. 100K001A01.
Dirty/faulty pneumatic valve
Replace valve.  Part No. 100K101A01.
Faulty encoder
Test encoder and replace if defective.

Looking for technical help, please contact us.

Angela Wagley

Submit Feedback