Over Temp Thermostat for Nordson® ProBlue/DuraBlue™ Melters

KNS0108

The overtemp tank thermostat will protect your glue tank from over heating in the event that the heater decides to run away.  This can be caused by a faulty heater or faulty RTD sensor.  

If your Nordson® unit will not power on, check the continuity between the leads of your over temp thermostat.  You may need to replace the tank over temp thermostat.

This is a 500 degree open on rise over temp thermostat that sells for $50.00/each. 
We recommend you keep one of these on the shelf for backup.

Have other issues with your melter, please call us for free technical assistance.

Angela Wagley
800-235-8090

Submit Feedback