AquaGuard™® Melters have been made obsolete by Nordson®. The hoses for these melters are also obsolete.
If your packaging lines are in a wet environment where machines are washed down, you may want to consider changing from the standard hoses to a wash down style to prolong the life of the hoses.
Keystone Industries® supplies the hoses for AquaGuard™® melters and assembles the wash down style hoses for the 2300, 3000, ProBlue and DuraBlue™ Melters.
Nordson® part nos. for AquaGuard™® Hoses:
Nordson® 155003 – 2 ft
Nordson® 155004 – 4 ft
Nordson® 155005 – 6 ft
Nordson® 155006 – 8 ft
Nordson® 155007 – 10 ft
Nordson® 155008 – 16 ft
Nordson® 155009 – 24 ft
Standard wash down hoses fit on the Nordson® 2300, 3000, ProBlue and DuraBlue™ melters. These are made with a durable rubber sheathing to provide a water resistant barrier over the hose electrical components. The round electrical connectors also seal to provide a water resistant barrier to the electrical components on both the melter and gun ends of the hose.
Nordson® part nos. for Standard Wash Down hoses:
Nordson® 276739 – 2 ft
Nordson® 276740 – 4 ft
Nordson® 276741 – 6 ft
Nordson® 276742 – 8 ft
Nordson® 276743 – 10 ft
Nordson® 143300 – 12 ft
Nordson® 276744 – 16 ft
Nordson® 223837 – 20 ft
Nordson® 276745 – 24 ft
Let me know if you need help changing over to a wash down style hose.
AquaGuard™® is a registered name for Nordson® Corporation. Keystone Industries® is not affiliated with Nordson® Corporation or any of its subsidiaries.