View Cart Cart Total $0.00
New? Click here to join!
Call Us: 800-235-8090
Se Habla Español

Chat Live with a Keystone Expert!

Pumps .



Display Results By .
Items 1 - 10 of 100         

Show items per page
Items 1 - 10 of 100         

Contact Us to Place An Order >>

Or Order by Phone: 800-235-8090

Nordson® Replacement Pumps

When it comes to hot melt adhesive dispensing systems, the quality and precision of each component counts. Without a first-rate hot melt pump for your Nordson® melter, you are leaving the consistency of the melt flow to chance. When only the best will do, Keystone Industries has the Nordson® replacement pump solutions to fit your needs, and your budget.


In our extensive experience with the packaging and hot melt adhesive industry, we understand the need for aftermarket products that deliver in terms of quality and value. Replacing Nordson® pumps with OEM products can be extremely expensive for a growing business. Choosing a sub-par aftermarket hot melt pump can be even more debilitating, resulting in lower productivity, increased operating expenses and costly downtime. The clear solution is a superior aftermarket Nordson® pump that’s every bit as good as the original.


Keystone Industries Nordson® pumps are:

  • Manufactured in a state-of-the-art facility to the highest standards
  • Meticulously crafted to fit your existing Nordson® hot melt system
  • Availablein an array of types to meet your specific needs
  • The same quality as more expensive OEM solutions

Save Even More with Nordson® Rebuilt Pumps

It’s our goal to provide products and services that help your business lower spending and boost production. We not only sell aftermarket pumps that provide the precise performance and durability to stand up to high-viscosity materials and extreme temperatures, we also sell Nordson® rebuilt pumps that have been expertly restored to “like new” condition. Our extensive quality procedures assures that each and every rebuilt pump meets OEM standards. Our experienced technicians have the expertise and cutting-edge facilities to deliver rebuilt products that meet the highest manufacturing standards.

The Different Types of Nordson®-equivalent Pumps from Keystone Industries

There are two basic hot melt pump types you may need for your company that uses Nordson® pumps. It’s important that you take the time todetermine which is the right hot melt pump for you and your business. All of our Nordson® rebuilt pumps are effective regardless of type, but some are more appropriate depending on the work you are doing.


Gear Pumps

A gear-based hot melt pump works on a chain-driven motor. The result is that you have a consistent glue line all throughout your application. This hot melt pump is powered by electricity, so there is no need for air compressors. Traditionally, smaller setups favor gear pumps.


Piston Pumps

Piston pumps, on the other hand, are air driven, and the motion of the piston in the hot melt pump tends to result in some loss of pressure between strokes the time the pump goes up and down. The result is more pressure overall but less consistency than gear pumps. These pumps are good for larger jobs where air compressors are utilized.

The Benefit of Buying Nordson® Pumps from Keystone

As the largest aftermarket hot melt company in the industry, we carry an extensive line of cost-effective solutions. Our inventory includes both rebuilt Nordson® pumps and new 14:1 pumps specifically built for Nordson® melters. Our manufacturing department pushes innovation in order to build the best possible products for businesses looking for a less expensive way to maintain the quality of their hot melt systems. Our aftermarket pumps can save your business more than 50% off purchasing OEM! Pumps for many legacy melters have been obsolete but Keystone Industries maintains a large inventory of pumps for Nordson® Model IV/V, 2300 and 3000 systems that can be purchased through our exchange program.


In order to ensure your complete satisfaction we supply:

  • Responsive service from knowledgeable, live representatives
  • Accurate assessments and no-obligation pricing
  • Fast ordering and detailed confirmation
  • Same-day shipping on most items in stock
  • Delivery to 41 countries around the globe

Why pay more for OEM when you don’t have to? Contact us for additional information and place your order for a top-quality aftermarket hot melt replacement pump from Keystone today!



Disclaimer: Keystone Industries is not affiliated with the Nordson® Corporation.


Keystone Industries® | World Headquarters |140 Manufacturers Court Winder, GA 30680 | Phone: 770-586-5990 | Fax: 770-586-5991 | Toll Free: 800-235-8090

Keystone Industries®, Inc. is not affiliated with any of the listed OEMs below. All OEM part numbers are for reference only.

Nordson® is a registered trademark of the Nordson® Corporation

HMT® is a registered trademark of Hot Melt Technologies, Inc.

ITW Dynatec® is a registered trademark of Illinois Toolworks

Slautterback® is a registered trademark of the Nordson® Corporation

Graco® is the registered trademark of Graco Inc.

Melton® and Valco Melton® are registered trademarks of Valco Cincinnati, Inc.

Powered By Digital Vantage Point