You Searched for ""
This Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. The cordset has a 120V heater that is wired to a thermostat in a manual handgun. This cordset fits on the KHH08115-VS hose.This Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. The cordset has a 120V heater that is wired to a thermostat in a manual handgun. This cordset fits on the KHH08115-VS hose.
Read More
This Cordset assembly is for industrial bottom mount handguns that are installed on industrial heated glue hoses. It is 120V and the heater is controlled by the RTD sensor.
Read More
This Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 120V has a 375° thermostat to control the heater and also is built into the cordset as a protective overtemp thermostat. This cordset retrofits Slautterback® model L7 slaved.
Read More
This Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 240V has a 375° thermostat to control the heater and also is built into the cordset as a protective overtemp thermostat. This cordset retrofits Slautterback® model L7.
Read More
This Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 120V and thermostat controlled. This cordset retrofits HMT® models DG-411-S, DG-413-S, DG-411-T, DG-413-T, DG-511, and DG-513. Handgun cordset is slaved to the electrical wires of the hose.
Read More
This Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 240V and and the heater is controlled by a fixed thermostat. This cordset retrofits onto Nordson® Models IV/V and VIII hoses.
Read More
This Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 240V and and the heater is controlled by the 100 ohm RTD sensor. This cordset retrofits onto Nordson® Models 2300/3000/ProBlue® and DuraBlue hoses. Also fits ITW® models Quattro® and Dynapack.
Read More
This Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 120V and the heater is controlled by the 100 OHM RTD sensor. This cordset retrofits ITW® DynaPro®and DynaPlus® models. Also fits Keystone handgun KHGI506.
Read More
This Cordset assembly is 3.5 feet in length and has a 12 pin connector to plug directly into a Nordson® 2300/3000/ProBlue® or DuraBlue hose and melter manifold. Also fits an ITW Quattro® or Dynapack hose and glue hose and melter manifold. The cordset contains a 120 ohm RTD sensor.
Read More
This Cordset assembly is 16 inches in length and has a 12 pin connector to plug directly into a Nordson® 2300/3000/ProBlue® or DuraBlue hose and melter manifold. Also fits an ITW Quattro® or Dynapack hose and glue melter manifold. The cordset contains a 120 ohm RTD sensor.
Read More