Three module applicator head with heater controlled by a fixed thermostat. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreSingle module standard washdown applicator head with heater controlled by a fixed thermostat. H20 Style standard modules (KNH2X) is used on this applicator head. Applicator head will fit to Nordson® Model IV/V washdown automatic hoses. Uses KNRN90 retaining nut for nozzles requiring retaining nut and KNH2X modules.
Read MoreDual module applicator head with heater controlled by a fixed thermostat. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module applicator head with heater controlled by a fixed thermostat. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module applicator head with heater controlled by a fixed thermostat. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air allowing for modules to fire separately requiring 2 solenoid valves (sold separately). Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreEight module standard applicator head with heater controlled by a fixed thermostat. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire the four modules simultaneously. Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreSingle module standard applicator head with heater controlled by a RTD sensor. H20 Style standard modules (KNH2X) is used on this applicator head. Applicator head will fit to Nordson® Model 2000/2200 standard automatic hoses. Uses KNRN90 retaining nut for nozzles requiring retaining nut and KNH2X modules.
Read MoreFour module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire the four modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreDual module applicator head with heater controlled by RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air firing modules at separate times and requiring 2 solenoid valves (sold separately). Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreIf your hot melt components fail during a job, you'll have to shut down production. How much will those lost hours cost you? Make sure you have the replacement parts you need to make repairs right away! Our H201T 240V RTD Spray Pad with Air Manifold is compatible with a number of Nordson® applicators, including the Nordson® 2300/3000/ProBlue® and DuraBlue.
Read More