Dual module applicator head with heater controlled by 100 ohm RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to ITW/LTI® DynaPro® and DynaPlus® standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreDual module applicator head with heater controlled by 100 ohm RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to ITW/LTI® DynaPro® and DynaPlus® standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreReplacement 24VDC solenoid for the K Series 14:1 piston pump
Read MoreWhether you’re using hot melt for packaging, automotive, print materials, or any other adhesive application, details matter. At best, inefficient use of adhesive can result in waste – at worst, it can cause issues with your system that add to costly downtime.
Read MoreCommon Causes of Glue Module Leaks | Keystone Industries®
Read More