This Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 240V has a 375° thermostat to control the heater. This cordset retrofits Nordson® model 115B, AD31 handgun.
Read MoreThis Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 120V has a 375° thermostat to control the heater. This cordset retrofits Slautterback® model L1.
Read MoreThis Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 120V and the heater is controlled by the 100 OHM RTD sensor. This cordset retrofits ITW® DGII models.
Read MoreThis Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 120V and heater is controlled by a 375°F fixed thermostat. This cordset allows a Keystone handgun to plug into a Slautterback® LS10.
Read MoreThis Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 240V and and the heater is controlled by the 100 ohm RTD sensor. This cordset retrofits onto Slautterback® Model L5.
Read MoreThis Cordset assembly is 8 feet in length and has a 12 pin connector to plug directly into a Nordson® 2300/3000/ProBlue® or DuraBlue applicator head and melter manifold. Also fits an ITW Quattro® or Dynapack glue applicator head and melter manifold. The cordset is 8 feet long and contains a 120 ohm RTD sensor.
Read MoreThis Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 120V and heater is controlled by a 100 ohm RTD sensor. This cordset plugs into a L5 Slautterback® handgun.
Read MoreThis Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 120V and heater is controlled by a 375°F fixed thermostat. This cordset allows a Keystone handgun to plug into a Slautterback® LS10.
Read MoreThis Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 240V and the heater is controlled by the 100 OHM RTD sensor. This cordset retrofits ITW® Dynamini model.
Read MoreThis Cordset assembly is for industrial handguns that are installed on industrial heated glue hoses. It is 240V and the heater is controlled by the 100 OHM RTD sensor. This cordset retrofits ITW® DGII models.
Read More