Four module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air allowing several solenoid valves (sold separately) to fire the modules at different times. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air allowing several solenoid valves (sold separately) to fire the modules at different times. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air allowing several solenoid valves (sold separately) to fire the modules at different times. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air allowing several solenoid valves (sold separately) to fire the modules at different times. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module low profile, washdown style applicator head with heater controlled by a RTD sensor. Intended for use in washdown environments. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid (sold separately) to fire all four modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue washdown automatic hoses. Use KNRN238 retaining nut for nozzles requiring retaining nut for these modules.
Read MoreFour module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air allowing several solenoid valves (sold separately) to fire the modules at different times. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air allowing several solenoid valves (sold separately) to fire the modules at different times. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module low profile applicator head with heater controlled by a fixed thermostat. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire the four modules simultaneously. Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module low profile applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid (sold separately) to fire all four modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Use KNRN238 retaining nut for nozzles requiring retaining nut for these modules.
Read MoreFour module standard washdown applicator head with heater controlled by a RTD sensor. Intended for use in washdown environments. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire the four modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue washdown automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read More