This 400 Series (24VDC/5.4W) is a 4-way spool valve with reverse pilot operated by a small, direct operated 4-way solenoid valve with light kit – a one-off in air valve manufacturing. The 4-way pilot means a low minimum operating pressure – no piston adapters – and minimal resistance to shifting. The balanced design in the pilot means shifting forces are consistently high and response times are repeatable regardless of inlet pressure fluctuations.
Read MoreThis 400 Series (24VDC/5.4W) is a 4-way spool valve pilot operated by a small, direct operated 4-way solenoid valve with light kit – a one-off in air valve manufacturing. The 4-way pilot means a low minimum operating pressure – no piston adapters – and minimal resistance to shifting. The balanced design in the pilot means shifting forces are consistently high and response times are repeatable regardless of inlet pressure fluctuations. The kit contains the solenoid valve, air tubing, fittings and wiring.
Read MoreThis 400 Series (24VDC/5.4W) is a 4-way spool valve pilot operated by a small, direct operated 4-way solenoid valve with light kit – a one-off in air valve manufacturing. The 4-way pilot means a low minimum operating pressure – no piston adapters – and minimal resistance to shifting. The balanced design in the pilot means shifting forces are consistently high and response times are repeatable regardless of inlet pressure fluctuations.
Read More4ft Direct Replacement for Graco® Therm-O-Flow® Plus 200 Hot Melt Hose The constant transfer of adhesive, sealants and thermoplastics from the reservoir to the applicator requires a reliable, durable heated hose. The KG19M102G 4ft hose performs as well as the OEM Graco® hose and is available at a much lower price. Our heated bulk melter hoses utilize an RTD sensor to provide consistent temperature control when dispensing adhesives and sealants.
Read MoreBenefits:
Read MoreSafe on Pneumatic Valves
Read More5-Pack Replacement 50M Mesh Filter Cartridges Comparable to Nordson® 1007372 With replacement cartridges for inline filter fittings between the applicator and the hose, all it takes is turning off the system pressure and a simply unscrewing the cartridge to change. The adhesive runs through the filter to collect char and other contaminants that would otherwise clog your nozzles. Filter changes do not require separating the hose and gun, reducing chances for stripping fitting threads.
Read MoreManifold Kit Type A for Nordson® Series 3100, 3400, and 3500 melters. This is a complete kit with tank filter assembly, drain valve assembly,pressure relief valve, orings, and screws. Ready to bolt in to your glue tank. Check your manual or call us with your melter configuration number to verify your melter uses this manifold.
Read MoreHeated hot melt hose for Nordson® VersaBlue® melters uses PT100 RTD to control heater wire. Hose core is 5/16' diameter and is intended for high pressure and high temperature automatic applications.
Read MoreHeated hot melt hose for Nordson® VersaBlue® melters uses PT100 RTD to control heater wire. Hose core is 5/16' diameter and is intended for high pressure and high temperature automatic applications.
Read More