SOLENOID, MINI, STD
Benefits:
Read MoreBenefits:
Read MoreLooking for a handgun for your Graco® Invisipac™ glue melter? Our durable, reliable handguns will provide a long term cost effective solution to your non-automated production needs. Many facilities use these for assembly of products or for reseals on an automated packaging line. We make many varieties that will fit most OEM melters. You can choose to have a top or bottom mount version, depending on your specific set up. Our handguns are the lightest weight on the market, have a 4 fingered trigger, swivel for easy operation and are ergonomically sound. There is a trigger safety lock to prevent accidental engagement of the trigger. We can also provide handgun hanger kits and booms for your workstations. Having hangers and booms can extend the life of the handgun by preventing operators from dropping the handguns. Handgun Prices for the Invisipac™: KHGG101 - 240V 120ohm bottom mount: $675.00/each KHGG102 - 240V 100ohm bottom mount: $695.00/each We have more varieties, including top mount - please call for pricing and availability. We make to order. Angela Wagley Keystone Industries®, Inc. sales@keystoneparts.com www.keystoneparts.com 800-235-8090
Read MoreHot Melt Nozzle Cleaning Kit The KNCK10-N is a hot melt nozzle cleaning kit that is used to probe contaminants from hot melt nozzles. As experienced production managers know, it is unsafe to use a torch on nozzles, and it could also damage the nozzle and surrounding parts. We recommend this kit as a way to safely remove clogs from a nozzle. Make sure you are cleaning the nozzle while it is hot. Keeping your hot melt nozzles free of char and containments is essential to a smooth running production line.
Read MoreBuy Nordson® Compatible 240V Heater Manifold Kit Online Our compatible manifold heater is considered a critical part since end of life for this part means down time. Order one for your shelf to reduce amount of downtime.. Thermal paste is included and must be applied fully across the heater block to prevent hot spots. Because failures can result in improper installation, please review installation instructions in Document Library.
Read MoreManifold Kit Type A for Nordson® Series 3100, 3400, and 3500 melters. This kit contains No. 028 orings, washers and screws only. Check your manual or call us with your melter configuration number to verify your melter uses this manifold.
Read MoreManifold Oring Kit for Nordson® Models IV and V melters. This kit contains Nos. 023, 120, 012, 013 viton orings, No. 013 back up ring and KNTF130 tank filter screen.
Read MoreManifold A service kit for Nordson® 3000 series melter manifolds. Contains complete tank filter kit, complete pressure relief valve kit, complete o-rings kit, and a package of 8 of manifold plugs.
Read MoreNordson® Compatible Pneumatic Tray Kit The pneumatic tray controls incoming air pressure to your hot melt pump. This is a critical part you will want to stock. Once this part hits it's end of life, the melter will not run, causing costly downtime.
Read MoreBuy Nordson® Compatible 480V Heater Manifold Kit We manufacture the manifold heater and consider it as critical part since end of life for this part means down time. Order one for your shelf to reduce amount of downtime.. Thermal paste is included and must be applied fully across the heater block to prevent hot spots. Because failures can result in improper installation, please review installation instructions in Document Library.
Read MoreModule rebuild kit for Keystone module part number KLMP047.
Read More