Dual module applicator head with heater controlled by RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreThree module applicator head with heater controlled by RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air firing modules at separate times and requiring 2 solenoid valves (sold separately). Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreDual module applicator head with heater controlled by RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air firing modules at separate times and requiring 2 solenoid valves (sold separately). Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreDual module Low Profile applicator head with heater controlled by RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air firing modules at separate times and requiring 2 solenoid valves (sold separately). Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreDual module applicator head with heater controlled by RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air firing modules at separate times and requiring 2 solenoid valves (sold separately). Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreDual module applicator head with heater controlled by RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air firing modules at separate times and requiring 2 solenoid valves (sold separately). Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreDual module applicator head with heater controlled by RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreThree module Washdown applicator head with heater controlled by RTD sensor and Washdown cordset with round connector. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue Washdown automatic hoses with matching round connector. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreDual module applicator head with heater controlled by RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreThree module applicator head with heater controlled by 100 ohm RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to ITW/LTI® DynaPro® and DynaPlus® standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read More