Three module applicator head with heater controlled by a fixed thermostat. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreDual module applicator head with heater controlled by a fixed thermostat. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module applicator head with heater controlled by a fixed thermostat. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module applicator head with heater controlled by a fixed thermostat. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air allowing for modules to fire separately requiring 2 solenoid valves (sold separately). Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreEight module standard applicator head with heater controlled by a fixed thermostat. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire the four modules simultaneously. Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire the four modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module standard applicator head (.88 Centers) with heater controlled by a 100ohm RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire the four modules simultaneously. Applicator head will fit to ITW®/LTI® DynaPro® and Dynaplus® automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreCompatible for Nordson® H400 Applicators Increase your production efficiency and reduce downtime with our aftermarket version of a Nordson® H400 module. Because we provide an aftermarket alternative, you save money and receive your parts on time.
Read MoreCompatible with Nordson® H20 Applicators Because we manufacture these modules, we can provide a low cost, high quality module for you.
Read MoreCompatible for Nordson® H200 Applicators - Right Angle Seat Increase your production efficiency and reduce downtime with our aftermarket version of a Nordson® H200 module. Because we provide an aftermarket alternative, you save money and receive your parts on time.
Read More