HOSE, AUTO 8FT HP/HT 230V RTD
Heated hot melt hose for Nordson® VersaBlue® melters uses PT100 RTD to control heater wire. Hose core is 5/16' diameter and is intended for high pressure and high temperature automatic applications.
Read MoreHeated hot melt hose for Nordson® VersaBlue® melters uses PT100 RTD to control heater wire. Hose core is 5/16' diameter and is intended for high pressure and high temperature automatic applications.
Read MoreHeated hot melt hose for Nordson® VersaBlue® melters uses PT100 RTD to control heater wire. Hose core is 5/16' diameter and is intended for high pressure and high temperature automatic applications.
Read MoreHeated hot melt hose for Nordson® VersaBlue® melters uses PT100 RTD to control heater wire. Hose core is 5/16' diameter and is intended for high pressure and high temperature automatic applications.
Read MoreHeated hot melt hose for Nordson® VersaBlue® melters uses PT100 RTD to control heater wire. Hose core is 5/16' diameter and is intended for high pressure and high temperature automatic applications.
Read MoreFour module standard applicator head with heater controlled by a RTD sensor. H200 Style reduced cavity modules (KNH2CRCXX) are used on this applicator head. This applicator head has independent air allowing several solenoid valves (sold separately) to fire the modules at different times. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses.
Read MoreFive module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire the five modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreEight module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire the eight modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module standard applicator head with heater controlled by a RTD sensor. H200 Style reduced cavity modules (KNH2CRCXX) are used on this applicator head. This applicator head has independent air allowing several solenoid valves (sold separately) to fire the modules at different times. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses.
Read MoreSix module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire the six modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreEight module standard applicator head with heater controlled by a fixed thermostat. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire the four modules simultaneously. Applicator head will fit to Nordson® Model IV/V standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read More