Four module applicator head with heater controlled by RTD sensor. H200 style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire all modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue© and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreZero cavity module provides precise cut off since the needle seats at the end of the nozzle seat. Mounts on standard and low profile Nordson® style blocks and comes with mounting o-rings and screws.
Read MoreSingle module applicator head with heater controlled by RTD sensor. H200 Zero Cavity Style modules (KNH2CZCXX) are used on this applicator head for very precise applications with no stringing. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses.
Read MoreSingle module applicator head with heater controlled by RTD sensor. H200 Zero Cavity Style modules (KNH2CZCXX) are used on this applicator head for very precise applications with no stringing. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses.
Read MoreSingle module applicator head with heater controlled by RTD sensor. H200 Zero Cavity Style modules (KNH2CZCXX) are used on this applicator head for very precise applications with no stringing. Applicator head will fit to Nordson® Model IV/V automatic hoses.
Read MoreSingle module applicator head with heater controlled by RTD sensor. H200 Zero Cavity Style modules (KNH2CZCXX) are used on this applicator head for very precise applications with no stringing. Applicator head will fit to Nordson® Model IV/V automatic hoses.
Read MoreSingle module Washdown applicator head with heater controlled by RTD sensor and Washdown cordset with round connector. H200 Zero Cavity Style module (KNH2CZCXX-MA) is used on this applicator head for more precise applications. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue washdown automatic hoses with matching round connector.
Read MoreDual module applicator head with heater controlled by RTD sensor. H200 Zero Cavity Style modules (KNH2CZCXX) are used on this applicator head for very precise applications with no stringing. This applicator head has common air which allows both modules to fire simulaneously using one solenoid valve (sold separately). Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses.
Read MoreWe would like to share some quotes from our loyal customers to help you make a decision about trying our parts. Below are quotes from Fresh Express, Pepsico, New World Pasta, DPSG, RockTenn, Tyson Foods, Sherwin Williams, Duracell, General Electric and Procter & Gamble.
Read MoreWhen you have a part that has failed on your adhesive melter, a quick resolution is critical to minimizing downtime. Most often, there are two options: replacement or repair. When you replace the part, you can sometimes lose value by discarding valuable components. To make the most of your hot melt equipment investment, consider having Keystone Industries® repair or rebuild the non-functioning part where you can extend the life of your investment.
Read More