O-RING, VITON
Durable, high heat viton o-ring. Fits the Keystone QC MiniBlue style inline filter cartridges. Fits Nordson® MiniBlue inline filter cartridges.
Read MoreDurable, high heat viton o-ring. Fits the Keystone QC MiniBlue style inline filter cartridges. Fits Nordson® MiniBlue inline filter cartridges.
Read MoreManifold Kit Type A for Nordson® Series 3100, 3400, and 3500 melters. This is a complete kit with tank filter assembly, drain valve assembly,pressure relief valve, orings, and screws. Ready to bolt in to your glue tank. Check your manual or call us with your melter configuration number to verify your melter uses this manifold.
Read MoreManifold Oring Kit for Nordson® Models IV and V melters. This kit contains Nos. 023, 120, 012, 013 viton orings, No. 013 back up ring and KNTF130 tank filter screen.
Read MoreSingle module applicator head with heater controlled by RTD sensor comes with an inline filter and solenoid valve. H200 Reduced Cavity Style module (KNH2CRCXX) is used on this applicator head for more precise applications. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses.
Read MoreManifold A service kit for Nordson® 3000 series melter manifolds. Contains complete tank filter kit, complete pressure relief valve kit, complete o-rings kit, and a package of 8 of manifold plugs.
Read MoreManifold A service kit for Nordson® melter manifolds. Contains tank filter screen, Viton o-rings and lube.
Read MoreDrain filter assembly for Nordson® 2300/3000 and ProBlue® melters; for Keystone Industries® K Series melters.
Read MoreInstallation kit for Keystone Industries® K Series melters. Contains manual, operator card, air nipple, air filter and electrical jumpers.
Read MoreWe would like to share some quotes from our loyal customers to help you make a decision about trying our parts. Below are quotes from Fresh Express, Pepsico, New World Pasta, DPSG, RockTenn, Tyson Foods, Sherwin Williams, Duracell, General Electric and Procter & Gamble.
Read MoreWhile hot melt adhesives are an excellent solution for many industrial applications, the high temperatures of the process need to be carefully controlled to avoid problematic fumes. When hot melt adhesives are heated, they inevitably release some fumes. That is the odor you detect when working close to hot melt nozzles. While having some fumes is normal, excessive fumes suggest a problem with your process and require some attention.
Read More