Dual module applicator head with heater controlled by RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air firing modules at separate times and requiring 2 solenoid valves (sold separately). Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreIf your hot melt components fail during a job, you'll have to shut down production. How much will those lost hours cost you? Make sure you have the replacement parts you need to make repairs right away! Our H201T 240V RTD Spray Pad with Air Manifold is compatible with a number of Nordson® applicators, including the Nordson® 2300/3000/ProBlue® and DuraBlue.
Read MoreFour module standard applicator head (.88 Centers) with heater controlled by a 100ohm RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire the four modules simultaneously. Applicator head will fit to ITW®/LTI® DynaPro® and Dynaplus® automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreDual module applicator head with heater controlled by 100 ohm RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to ITW/LTI® DynaPro® and DynaPlus® standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreDual module applicator head with heater controlled by 100 ohm RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to ITW/LTI® DynaPro® and DynaPlus® standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreDurable, high heat viton o-ring. Fits Melton® Spray/Swirl nozzles
Read MoreDurable, high heat viton o-ring used on Nordson® spray nozzles that screw on to Nordson® style spray modules 144906/ KNH2CS.
Read MoreDurable, high heat viton o-ring used on Nordson® spray nozzles that screw on to Nordson® style spray modules 144906/ KNH2CS.
Read MoreDurable, high heat viton o-ring used on Nordson® spray nozzles that screw on to Nordson® style spray modules 144906/ KNH2CS.
Read MoreWhere does your company fall in this graph? Do you have the authority to make positive change within your organization? If so, you can provide enormous savings to a company by implementing a Preventive Maintenance program on your packaging lines. Provided is a sample of a simple PM Check List for preventive maintenance on the adhesive melting equipment that can get you started. Start small and move up to the whole packaging machine. You can be the hero and provide a longer life for the company's machinery, save in spend in parts purchased and prevent expensive downtime. Some of the many ways to extend the life of the adhesive melter are: Change filters before contaminants cause restricted flow (both tank and and inline) Purge tank of contaminants (Keystone provides cleaner) Replace seals/gaskets in pump Check glue hoses for wear/tear Check circuitry for accurate settings (Keystone repairs OEM circuit boards) Verify applicators and hoses are holding set temperatures Clean or replace nozzles Verify glue modules are not leaking and are firing properly Verify tank manifold has no leaks Verify pump is shifting correctly and holding pressure Need more info or assistance with parts? We are here to assist you with our many years of expertise in this arena. Call us at 800-235-8090 or 770-586-5990 or email us at sales@keystoneparts.com. Angela Wagley www.keystoneparts.com
Read More
