Three module applicator head with heater controlled by 100 ohm RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to ITW/LTI® DynaPro® and DynaPlus® standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreFour module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air allowing several solenoid valves (sold separately) to fire the modules at different times. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air allowing several solenoid valves (sold separately) to fire the modules at different times. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreDual module applicator head with heater controlled by RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire both modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreDual module applicator head with heater controlled by RTD sensor. The H200 Style standard modules (KNH2CA) used on this applicator head swivel for more flexibility. This applicator head has independent air firing modules at separate times and requiring 2 solenoid valves (sold separately). Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreFour module applicator head with heater controlled by RTD sensor. H200 style standard modules (KNH2CA) are used on this applicator head. This applicator head has common air allowing one solenoid valve (sold separately) to fire all modules simultaneously. Applicator head will fit to Nordson® 2300/3000/ProBlue© and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreFour module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air allowing several solenoid valves (sold separately) to fire the modules at different times. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreFour module standard applicator head with heater controlled by a RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air allowing several solenoid valves (sold separately) to fire the modules at different times. Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut and KNH2CA modules.
Read MoreDual module Low Profile applicator head with heater controlled by RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air firing modules at separate times and requiring 2 solenoid valves (sold separately). Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read MoreDual module Low Profile applicator head with heater controlled by RTD sensor. H200 Style standard modules (KNH2CA) are used on this applicator head. This applicator head has independent air firing modules at separate times and requiring 2 solenoid valves (sold separately). Applicator head will fit to Nordson® 2300/3000/ProBlue® and DuraBlue standard automatic hoses. Uses KNRN238 retaining nut for nozzles requiring retaining nut.
Read More