NOZZLE, 90° .010 .25MM
Single 90 degree nozzle with stainless steel insert and socket head screw in back for easy cleaning. Fits Keystone KLMP047 and ITW®/LTI® Mod Plus Module L18047.
Read MoreSingle 90 degree nozzle with stainless steel insert and socket head screw in back for easy cleaning. Fits Keystone KLMP047 and ITW®/LTI® Mod Plus Module L18047.
Read MoreSingle 90 degree nozzle with stainless steel insert and socket head screw in back for easy cleaning. Fits Keystone KLMP047 and ITW®/LTI® Mod Plus Module L18047.
Read MoreSingle 90 degree nozzle with stainless steel insert and socket head screw in back for easy cleaning. Fits Keystone KLMP047 and ITW®/LTI® Mod Plus Module L18047.
Read MoreCompatible with ITW Dynatec® Microbead Style Applicators
Read MoreAir regulator and filter assembly fits on air inlet to Nordson® 2300 series melters. Can be used elsewhere to regulate air on, for example, air solenoids, spray applicators, etc.
Read MoreSafe on Pneumatic Valves
Read MoreMany manufacturing facilities are mandated by the FDA to periodically wash down equipment. If you are one of these facilities, you may have had or are having various electrical issues with non-wash down equipment/parts.
Read MoreWhere does your company fall in this graph? Do you have the authority to make positive change within your organization? If so, you can provide enormous savings to a company by implementing a Preventive Maintenance program on your packaging lines. Provided is a sample of a simple PM Check List for preventive maintenance on the adhesive melting equipment that can get you started. Start small and move up to the whole packaging machine. You can be the hero and provide a longer life for the company's machinery, save in spend in parts purchased and prevent expensive downtime. Some of the many ways to extend the life of the adhesive melter are: Change filters before contaminants cause restricted flow (both tank and and inline) Purge tank of contaminants (Keystone provides cleaner) Replace seals/gaskets in pump Check glue hoses for wear/tear Check circuitry for accurate settings (Keystone repairs OEM circuit boards) Verify applicators and hoses are holding set temperatures Clean or replace nozzles Verify glue modules are not leaking and are firing properly Verify tank manifold has no leaks Verify pump is shifting correctly and holding pressure Need more info or assistance with parts? We are here to assist you with our many years of expertise in this arena. Call us at 800-235-8090 or 770-586-5990 or email us at sales@keystoneparts.com. Angela Wagley www.keystoneparts.com
Read More